Single Channel LIN RGB Slave Ambient Light Controller
MLX81108 Melexis
The MLX81108 LIN RGB slave provides a single chip IC solution for driving up to four LEDs (RGB+1) via constant current sources in automotive ambient lighting applications.
Top features
-
16-bit RISC MCU with 32kB Flash memory, RAM, EEPROM with ECC
-
Internal RC-Oscillator
-
Co-processor for MUL and DIV operations
-
LIN Protocol Controller according to LIN 2.x and SAE J2602
-
Low interrupt load to the application
-
LIN Transceiver according to LIN 2.x and SAE J2602
-
Support for autoconfig according bus shunt
-
Support of MiLoc autoconfig system
-
4 programmable constant current (35mA)/high voltage capable IOs
-
16-bit current modulation outputs
-
Interrupt capable inputs
-
10-bit ADC with integrated pre-divider connected to all IOs
-
Internal Battery and reference voltage monitor
-
LED colour compensation as well as aging compensation
-
Automotive temperature range of -40°C to 125°C
- SOIC8 thermally enhanced package
Single Channel LIN RGB Slave Ambient Light Controller - MLX81108
Product description
The MLX81108 LIN RGB slave provides a single chip IC solution for driving up to four LEDs (RGB+1) via constant current sources in automotive ambient lighting applications. Every output can be programmed to a maximum current of 35 mA through the built-in Flash memory.
All necessary components like physical layer LIN transceiver, LIN controller, voltage regulator and 16-bit RISC-based microcontroller, as well as supporting functions like ADC, 16-bit current modulation, constant current high voltage capable outputs and LED color and aging compensation are integrated into the chip.
It also includes the possibility for LIN auto-configuration and can thus be used for other applications requiring a low pin count fully integrated LIN slave. The LIN protocol handler meets all LIN standards including LIN2.x, as well as SAE J2602.
To support a high thermal performance by keeping the low cost target, our MLX81108 is offered in a thermally enhanced SOIC8 package.
Features and benefits
-
16-bit RISC MCU with 32kB Flash memory, RAM, EEPROM with ECC
-
Internal RC-Oscillator
-
Co-processor for MUL and DIV operations
-
LIN Protocol Controller according to LIN 2.x and SAE J2602
-
Low interrupt load to the application
-
LIN Transceiver according to LIN 2.x and SAE J2602
-
Support for autoconfig according bus shunt
-
Support of MiLoc autoconfig system
-
4 programmable constant current (35mA)/high voltage capable IOs
-
16-bit current modulation outputs
-
Interrupt capable inputs
-
10-bit ADC with integrated pre-divider connected to all IOs
-
Internal Battery and reference voltage monitor
-
LED colour compensation as well as aging compensation
-
Automotive temperature range of -40°C to 125°C
- SOIC8 thermally enhanced package
Documents and tools
Application flyer(s)
Datasheet(s)
Product flyer(s)
Selection guide(s)
Videos
LIN RGB LED driver IC for automotive ambient lighting
During this demo Michael Bender, Product Line Manager Embedded Networking, gives more technical details on the single chip RGB LED control and explains its main applications in an automotive environment.
